 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary SF1111A * * * * * Designed for CDMA2000 BTS Applications Simple External Impedance Matching Hermetic SMP-97 Surface-Mount Case Unbalanced Input and Output Complies with Directive 2002/95/EC (RoHS) Pb Value +10 30 -40 to +85 260C for 30 s Units dBm VDC C 160 MHz SAW Filter Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max. Soldering Profile SMP-97 Electrical Characteristics Characteristic Nominal Center Frequency Passband Insertion Loss at fc 1.5 dB Passband 3 db Passband Amplitude Ripple over fc470 kHz Phase Linearity over fc 590 kHz Rejection fc-10.0 to fc-1.25 and fc+1.25 to fc+10.0 MHz fc-20 to fc-10.0 and fc+10.0 to fc+20 MHz Operating Temperature Range TA 1, 2, 3 1 40 50 -20 +70 Sym fC IL BW1.5 BW3 1, 2 590 750 0.7 2 1.0 5 Notes 1 Min Typ 160.000 9 Max 11.0 Units MHz dB kHz dB rms dB C Impedance Matching to 50 Unbalanced Case Style Lid Symbolization (YY = year, WW = week) External L-C SMP-97 24.6 x 9 mm Nominal Footprint RFM SF1111A YYWW Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. Electrostatic Sensitive Device. Observe precautions for handling. Electrical Connections Connection Port 1 Hot Port 1 Gnd Return Port 2 Hot Port 2 Gnd Return Case Ground Terminals 10 1 5 6 All others RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1111A-121504 Page 1 of 3 160 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1111A-121504 Page 2 of 3 160 MHz SAW Filter SMP-97 Case 10-Terminal Ceramic Surface-Mount Case 24.6 x 9 mm Nominal Footprint Case Dimensions Dimension A B C D E H M N P Min 24.41 8.80 mm Nom 24.64 8.99 1.75 2.29 1.02 1.0 4.83 3.40 1.905 Max 24.94 9.30 2.00 Min 0.961 0.349 Inches Nom 0.970 0.354 0.069 0.090 0.040 0.039 0.190 0.134 0.075 Max 0.982 0.366 0.079 Electrical Connections Materials Solder Pad Termination Lid Body Pb Free Au plating 30 - 60 uInches (76.2-152 uM) over 80200 uInches (203-508 uM) Ni. Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 uInches Thick Al2O3 Ceramic Port 1 Port 2 Connection Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 10 1 5 6 All others Return is ground Return is hot B C H D N M 6 7 A 8 9 10 5 4 3 2 1 5 4 3 2 1 6 7 8 9 10 P (8 Places) E (10 Places) TOP VIEW BOTTOM VIEW RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-9148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF1111A-121504 Page 3 of 3 |
Price & Availability of SF1111A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |